aƷ퓱
ZJHM fine pneumatic sleeve control valve
Hits5943    Update time2017-05-10

ZJHM series pneumatic film sleeve control valve is a pressure balance type regulating valve. Equipped with multi-spring actuator, the overall structure of compact, heavy light, good stability. Fluid channel was 3 streamlined, the pressure drop loss is small, allowing large pressure, noise, circulation capacity. Widely used in precise control of gas, liquid and other media process parameters such as: pressure, flow, temperature, liquid level maintained at a given value. Particularly suitable for large flow, large pressure, leakage requirements are not high occasions.

This series of products are standard and adjustable cutting type, bellows sealing type, jacket insulation and other varieties. Products nominal pressure level households ~ 10 , 16 , 40 , 64 , body diameter range from DN20 ~ 500 , theapplication of fluid temperature from -196  ~ + 560 , within the scope of a variety of grades. Leakage standards are ClassIV, Class V and Class VI . Flow characteristics are linear or equal percentages. Variety of varieties, specifications to choose from.

Features:

1. The use of balanced spool structure, axial imbalance force is small, allowing large pressure, good stability. Sleeve interchangeability is good, easy disassembly, easy maintenance.

2. All-metal spool structure for a variety of work occasions, to Class IV leaking standards, soft seal structure spool to VIgrade leakage standards.

3. The valve body is designed according to the principle of fluid mechanics, such as low flow resistance flow path, adjustable range, the inherent adjustable ratio of 50: 1 , rated flow coefficient increased by 30% .

4. The actuator adopts a multi-spring structure, a height reduction of 307% . Weight reduction by 30% .

5.ZJHMW bellows sealing control valve, the movement of the stem to form a complete seal, blocking fluid leakage.



name Material
Valve body cover ZG230-450, ZG0Cr18Ni9
Spool seat 0Cr18Ni9,0Cr18Ni9 + PTFE, 0Cr18Ni9 + Secretary too Lai
filler PTFE, flexible graphite
Bellows 0Cr18Ni9
Gasket Graphite spiral wound gasket (V6590), toothed gasket
Membrane cover A3,0Cr18Ni9
Corrugated diaphragm Reinforced nylon fabric with nitrile rubber
spring 60Si2Mn
Stem putter 0Cr18Ni9, 2cr13


Main technical parameters of sleeve valve

Nominal diameter 20 25 32 40 50 65 80 100 125 150 200 250 300 350 400
Seat diameter mm 20 25 32 40 50 65 80 100 125 150 200 250 300 350 400
Rated kv Linear 6.9 11 17.6 27.5 44 69 110 176 275 440 630 1000 1600 2156 2816
Equal percentage 6.3 10 16 25 40 63 100 160 250 400 690 900 1440 1960 2560
Nominal pressure (MPa) 1.6, 2.5, 4.0,
Travel (mm) 16 25 40 60 100 130
Film effective area Ae (cm2) 280 350 560 900 1400 Piston type
Signal range KPa 20-100, 40-200, 80-240
Air supply pressure MPa 0.1-0.4 0.4-0.7
Inherent flow characteristics Linear, equal percentage, quick open
Inherently adjustable 50: 1
Leakage rating Hard seal IV, V grade; soft seal VI
Flange size Complies with JB / 79. (2) _94, HG20592_97, GB, ANSI, JIB, DIN and other standards
Body material WCB, 304, 316, WC6, titanium, nickel, Hastelloy, Monel et al
Spool material 304, 316, 420, titanium, nickel, Hastelloy, Monel et al
Working temperature -40 ~ + 230 (room temperature), +250 ~ +450 (high temperature), - 40 ~ -196 (low temperature)
Series type Room temperature type, medium temperature type, low temperature type. Bellows seal type, jacket insulation type, adjust the cut off type




Key performance indicators

Serial number project Standard adjustment valve High temperature, low temperature control valve
Without locator With locator Without locator With locator
1 Basic error (%) 5 1 15 4
2 Hysteresis <(%) 3 1 10 3
3 Four districts <(%) 3 0.4 8 1
4 Always Point Deviation <(%) Open air Starting point 2.5 1 6


2.5

end 5 15
Gas off Starting point 5 15
end 2.5 6
5 Rated stroke deviation <(%) 2.5 +2.5 +6 +2.5

Note: The performance of this product in line with GB / T4213-2008


Allows differential pressure 
Pneumatic type (positive role) Metal seal type Allowable pressure table Unit: MPa

Actuator model Spring range (KPa) Air supply pressure (KPa) Locator (with / no) Seat diameter dn (mm)
20 25 32 40 50 65 80 100 125 150 200
ZHA-22 20-100 0.14 no 1.27 1.06
band 3.81 3.18
40-200 0.25 band 5.40 4.50
80-240 0.4 band 10.0 9.81
ZHA-23 20-100 0.14 no 1.33 0.93 0.76
band 3.40 2.80 2.29
40-200 0.25 band 4.82 3.96 2.29
80-240 0.4 band 10.0 8.63 7.06
ZHA-34 20-100 0.14 no 0.92 0.76 0.61
band 2.78 2.29 1.85
40-200 0.25 band 3.94 3.24 2.62
80-240 0.4 band 8.58 7.06 5.72
ZHA-45 20-100 0.14 no 0.86 0.72 0.54
band 2.58 2.16 1.63
40-200 0.25 band 3.66 3.70 2.32
80-240 0.4 band 7.97 6.68 5.05


Pneumatic type (positive role) Metal seal type Allowable pressure table Unit: MPa

Actuator model

Spring range (KPa)

Air supply pressure (KPa)

Locator (with / no)

Seat diameter dn (mm)

20

25

32

40

50

65

80

100

125

150

200

ZHA-22

20-100

0.14

With / no

1.27

1.06










40-200

0.25

band

3.81

3.18










80-240

0.28

band

10.0

8.48










ZHA-23

20-100

0.14

With / no



1.33

0.93

0.76







40-200

0.25

band



3.40

2.80

2.29







80-240

0.28

band



9.08

7.46

6.11







ZHA-34

20-100

0.14

With / no






0.92

0.76

0.61




40-200

0.25

band






2.78

2.29

1.85




80-240

0.28

band






7.40

6.11

4.94




ZHA-45

20-100

0.14

With / no









0.86

0.72

0.54

40-200

0.25

band









2.58

2.16

1.63

80-240

0.28

band









6.89

5.78

4.37


Pneumatic type (positive role) Metal seal type Allowable pressure table Unit: MPa

Actuator model Spring range (KPa) Air supply pressure (KPa) Locator (with / no) Seat diameter dn (mm)
20 25 32 40 50 65 80 100 125 150 200
ZHA-22 20-100 0.14 no 1.98 1.66
band 3.00 3.00
40-200 0.25 band 3.00 3.00
80-240 0.4 band 3.00 3.00
ZHA-23 20-100 0.14 no 1.77 1.45 1.19
band 3.00 3.00 2.86
40-200 0.25 band 3.00 3.00 2.86
80-240 0.4 band 3.00 3.00 3.000
ZHA-34 20-100 0.14 no 1.44 1.19 0.96
band 3.00 2.86 2.31
40-200 0.25 band 3.00 3.00 3.00
80-240 0.4 band 3.00 3.00 3.00
ZHA-45 20-100 0.14 no 1.34 1.22 0.85
band 3.00 2.71 2.04
40-200 0.25 band 3.00 3.00 2.73
80-240 0.4 band 3.00 3.00 3.00


Pneumatic type (positive role) Metal seal type Allowable pressure table Unit: MPa

Actuator model Spring range (KPa) Air supply pressure (KPa) Locator (with / no) Seat diameter dn (mm)
20 25 32 40 50 65 80 100 125 150 200
ZHA-22 20-100 0.14 With / no 1.98 1.65
40-200 0.25 band 3.00 3.00
80-240 0.28 band 3.00 3.00
ZHA-23 20-100 0.14 With / no 1.77 1.45 1.19
40-200 0.25 band 3.00 3.00 2.86
80-240 0.28 band 3.00 3.00 3.00
ZHA-34 20-100 0.14 With / no 1.44 1.19 0.95
40-200 0.25 band 3.00 2.86 2.31
80-240 0.28 band 3.00 3.00 3.00
ZHA-45 20-100 0.14 With / no 1.34 1.22 0.85
40-200 0.25 band 3.00 2.71 2.04
80-240 0.28 band 3.00 3.00 3.00






Note of the allowable pressure table:

The packing material is PTFE

The direction of the medium is opposite to that of the spool

Metal seal type leakage class for the IV level

Values are subject to nominal pressure, pressure, and temperature limits

Bellows sealed type P2  0 to be reconciled;





Dimensions and weight Unit: mm

General diameter DN 20 25 32 40 50 65 80 100 125 150 200 250 300
L PN16MPa 187 184 200 222 254 276 298 352 410 451 600 673 737
PN16MPa 194 197 210 235 267 292 317 368 425 473 600 708 775
PN16MPa 206 210 220 251 286 311 337 394 440 508 650 752 819
A 280 360 470 580
H1 PN16, 40 53 58 68 73 80 90 98 108 108 140 168 225 245
PN16, 64 63 68 75 83 88 100 105 125 125 170 203 260 280
H2 Implementing agency 280 310 395 525 725
H3 High temperature heat sink type 210 210 225 230 230 335 335 345 408 454 482 550 580
Bellows seal type 303 305 392 395 405 529 540 553 710 756 800 900 940
H Standard room temperature type 400 420 450 455 460 610 622 640 780 870 890 1205 1235
Low temperature type H3 750 900
H4 90 90 92 92 92 98 98 98 110 120 120 180 180
D 310 310 335 335 335 430 465 520 585 660 770 850 850
Weight kg PN16 / 40 20 twenty two 25 32 38 62 67 83 132 160 245 350 470
N64 / 100 twenty four 25 30 42 52 78 82 102 170 190 285 500 660
Low temperature type PN16 / 40 40 48 52 60 68 90 105 143 210 282 315 580 800
Low temperature type PN64 / 100 50 60 65 75 85 112 131 178 262 352 393 725 980


Ordering instructions
Please fill in the "specifications" or specify the following when ordering :
First, if the order has not been selected before the model, please provide us with your use parameters
1, nominal diameter, rated flow coefficient Kv
2, fluid properties (including nominal pressure, temperature, viscosity or acidity)
3, the role of valve form (gas - off or gas - open)
4, flow was characteristics
5, the valve before the valve pressure
6, the valve body, core materials
7, the input signal
8, whether with attachments, description of the annex model, so that we for your correct selection.
Second, the special requirements
1, special inspection
2, completely to the oil, to the water treatment;
3, copper treatment;
4, special interface, piping;
5, the use of vacuum conditions;
6, specify the coating color
7, special medium (gas, chlorine, nitrogen)
8, the use of stainless steel connections;
Third, if the design unit has been selected by the company's product model, please press the model directly to our sales department order
Fourth, when the use of the occasion is very important or more complex pipeline, please provide you with the design drawings and detailed parameters, by our experts for your audit check.
Copyright © 2017 Zhejiang Xingfeng Valve Co., Ltd Corporation All Rights Reserved    ICP12022351̖-13
g֧֣оW
Xingfeng valve WeChat public number
Swept the phone
Keep in touch with us
Ϸ è齫ûй ƽһФ̳ ֻ齫3׿ ̽ȷ տ3 ֲַʹٷ ҺƱ۸ Ƶ չ